Deep Penetrating PCD Glass Cutting Wheel is our main product, generally used to cut various thin glasses, while the crack depth is controllable and crack surface is vertical.
The serrated wheel with teeth allows the glass cutter to scribe deeper into the glass while reduces chipping and outperforms Fletcher Terry carbide glass cutting wheel by more than 30 times during the glass scoring process.
Deep Penetrating PCD Glass Cutting Wheel is commonly used in cutting tempered glass, thin enforced glass, high end LCD production lines, LCD panels, substrate glass, touch screens, float glass, constructional engineering glass, glass doors, windows, mirrors and automotive glass.
photo of 40µm Tempered Glass Cutting line and Cutting section
photo of 32µm Tempered Glass Cutting line and Cutting section
Highlights:
- The teeth are distributed regularly and equally, number of teeth and the teeth depth can all be adjusted upon request.
- The Deep Penetrating PCD Glass Cutting Wheel has a sharp cutting edge and precise cutting angle. Can cut glasses with vertical and smooth sections and it will not cause chipping during glass cutting process.
- Compared with the average glass cutting wheel, the Deep Penetrating PCD Glass Cutting Wheel can guarantee vertical cutting sections and deeper cutting cracks. It can control the scoring depth according to manufacturing requirements. The cutting depth can reach 50 to 100 percent the depth of the glass.
- The Deep Penetrating PCD Glass Cutting Wheel causes no fragmentation, and has very long service life.
- Our Deep Penetrating diamond scribing wheel is offered at low price.
- Offered at much lower price than Bohle. The wheels will improve production efficiency, reduce rework and scrap rate from glass cutting thus lessen production processes and cost.
|
|
OD(mm)
|
ID(mm)
|
t(mm)
|
V(°)
|
Teeth Length(mm)
|
Teeth Depth(mm)
|
1.20
|
.50
|
.40
|
80-140
|
100-230
|
.005-.015
|
1.80
|
.80
|
.65
|
80-140
|
100-230
|
.005-.015
|
2.00
|
.80
|
.65
|
80-140
|
100-230
|
.005-.015
|
2.50
|
.80
|
.65
|
80-140
|
100-230
|
.005-.015
|
3.00
|
.80
|
.65
|
80-140
|
3-540
|
.001--.004
|
3.20
|
1.20
|
1.00
|
80-140
|
3-540
|
.001--.004
|
4.00
|
1.30
|
1.00
|
80-140
|
3-540
|
.001--.004
|
5.00
|
1.30
|
1.00
|
80-140
|
3-540
|
.001--.004
|
|
Other Deep Penetrating PCD Glass Cutting Wheels sizes and dimensions available upon request