graphic of PCD Glass Cutting Wheel
Wheel Type
OD
ID
Thickness
Angle


The standard PCD glass cutting wheel is polished on both sides and the economical glass cutter is sub-polished on both sides. PCD glass cutting wheel outperforms Fletcher Terry carbide glass cutting wheel by more than 30 times when cutting glass.

For standard glass cutting, the performance is stable and friction coefficient between the wheel, the PCD axle and wheel holder is very low, so the holder is protected.

Glass cutting process becomes smoother and the score line is perfect. The PCD Glass Cutting Wheel is commonly used in cutting Corning Gorilla glass, Eagle glass, LCD panels, substrate glass, touch screens, float glass, mirrors and automotive glass.







Highlights:

  • PCD glass cutting wheel has strong abrasive resistance and long service life, up to 30 times longer than Fletcher or Bohle PCD glass cutting wheel.
  • PCD glass cutting wheel has a sharp cutting edge and precise cutting angle, features smooth cutting and flawless cutting lines scoring glass.
  • PCD glass cutting wheel can cut glass with vertical and smooth sections and will not cause chips of glass during cutting process.
  • The friction coefficient between the cutting wheel and the holder is very small so the holder and wheel insert can be protected from friction.
  • PCD glass cutting wheel can cut the ITO conducting film and the glass at the same time when cutting touch screens. The glass cutter can be used to cut touch screen that is made of tempered glass.

PCD Glass Cutting Wheel dimensions image

OD(mm)

ID(mm)

t(mm)

V(°)

1.20

.50

.40

60-163

2.00

.80

.65

60-163

2.50

.80

.65

60-163

3.00

.80

.65

60-163

3.20

1.20

.80

60-163

4.00

1.30

1.00

60-163

5.00

1.40

1.10

60-163

6.00

1.50

1.10

60-163

Other PCD Glass Cutting Wheels sizes and dimensions available upon request